JKS - Rear Track Bar Bracket 2-6in for JK - OGS170
JKS - Rear Track Bar Bracket 2-6in for JK - OGS170
Many in stock
Track Bar Relocation Brackets from JKS Manufacturing permanently correct geometry of the rear track bar following the installation of a CV type driveshaft. The bolt-on bracket realigns the mounting point on the axle with the track bar and eliminates the binding problem caused by the rotated axle housing. As a result, the track bar and its bushings are returned to a neutral position and unwanted stresses are relieved from the mounting points. This Relocation Bracket also raise the mounting point on the axle to reduce track bar operating angles and minimize side-to-side axle movement. This improves vehicle stability on lifted vehicles at higher speeds and helps keep the axle centered beneath the chassis at all times. A heavy, steel crush-proof sleeve fits inside the factory bracket to ensure maximum torque can be applied to the mounting hardware without risk of loosening or distortion over time.
Details:
- Heavy-duty reinforcement bracket attaches directly to factory track bar mount on axle housing
- Relocates mounting point 4.0 in. higher to reduce trackbar operating angle and improve handling at high speeds
- Angled design corrects geometry on lifted vehicles with rotated axle housing or CV-type driveshaft to eliminate binding and premature bushing wear
- Economical bolt-on solution minimizes risk of track bar failure on the trail
- Protective powder coat finish resists corrosion
Track Bar Relocation Brackets from JKS Manufacturing permanently correct geometry of the rear track bar following the installation of a CV type driveshaft. The bolt-on bracket realigns the mounting point on the axle with the track bar and eliminates the binding problem caused by the rotated axle housing. As a result, the track bar and its bushings are returned to a neutral position and unwanted stresses are relieved from the mounting points. This Relocation Bracket also raise the mounting point on the axle to reduce track bar operating angles and minimize side-to-side axle movement. This improves vehicle stability on lifted vehicles at higher speeds and helps keep the axle centered beneath the chassis at all times. A heavy, steel crush-proof sleeve fits inside the factory bracket to ensure maximum torque can be applied to the mounting hardware without risk of loosening or distortion over time.
Details:
- Heavy-duty reinforcement bracket attaches directly to factory track bar mount on axle housing
- Relocates mounting point 4.0 in. higher to reduce trackbar operating angle and improve handling at high speeds
- Angled design corrects geometry on lifted vehicles with rotated axle housing or CV-type driveshaft to eliminate binding and premature bushing wear
- Economical bolt-on solution minimizes risk of track bar failure on the trail
- Protective powder coat finish resists corrosion
TECH SPECS:
- Type: Track Bar Bracket
- Lift Height: 2 – 6In
- Location: Rear
- Mounting Location: Axle
- Material: Steel
- Color: Black
- Qty: 1
TECH SPECS:
- Type: Track Bar Bracket
- Lift Height: 2 – 6In
- Location: Rear
- Mounting Location: Axle
- Material: Steel
- Color: Black
- Qty: 1